Male cijevi u obliku cjevčica u obliku boca s tekućinom za punjenje etiketirane trake prilagođene E strojevi za nalijevanje tekućeg punila

Opis

Product Overview for model NPACK-50G small bottles filling capping labeling line

Suitable for the applications of 5-100ml liquid filling and sealing in pharmaceutical industry, the YX-50G Small Dose Liquid Filling Machine is with reasonable structure, high precision indexing table for filling, capping, cap pressing，precision peristaltic pump filling; The machine is controlled by the PLC with the advantage of easy operation and maintenance. There is the system for functioning as no filling without bottles feeding, no plugging without bottles sensoring, no capping without pluggers. The filling line, made of the stainless steel as its platform for working ,is in line with GMP standard. The machine controlled by pneumatic and electric dual system in the machine adopts the mechanical transmission, which can transmit the power in stable and lower power-consumption plus the accurate positioning features .The filling line is especially used in the mass production .

Application of machine filling line :

II. Main Technical Parameter of filling capping labeling line :

Model NPACK-50G
Filling Volume 1-150ml
Output 30-50 Bottles/min
Preciznost punjenja manja od ± 1%
Power Supply 220V/50Hz (customized according to customer's requirements)
Stopa prijenosa više od 99%
Stoppering rate more than 99% Labeling rate more than 99%
Dovod zraka 1,3 m3 / h 0,4-0,8Mpa
Snaga 2,0 kw
Težina 650 kg
Dimension 6000*3200*1750mm

Basic configuration of Filling line

Spare parts for filling monoblock

III.Main parts &working principle

Bottles caps &inner plugger vibrator

1. The machine is constituted of such parts as conveyor belt, sketch of machine, vibrator for bottles & caps, peristaltic pump etc.

2. Prepare sufficient bottles, plugs, caps and liquid. The plugs and caps shall fill fully the vibrating tracks and at the plugging and capping work stations. The bottles are to be delivered by conveyor belt to the indexing star wheel, then the bottles will be delivered intermittently by the indexing star wheel to the filling, plugging and capping positions.

3. The liquid is to be sucked in by the peristaltic pump and then delivered by the silicone tubes. Finally the liquid will be filled into the bottles by the needle tubing which are moving automatically up and down. For each moving up and down the needle tubes, two cycles of filling is done. The filling is completed by the cyclic insertion of filling nozzles into the bottles. With no-bottle detecting photoelectric eye ,if there is no bottles on the work station, the peristaltic pump stops work as no bottles can be detected.

4. The plug vibrating bowl delivers the plugs to the plug inserting station, meanwhile the filled bottles are transferred intermittently by the indexing star wheel to the position under the plugging station.

5. Then the cylinder drives the plug inserter to dive downward and push the plugs into the bottles. The plug inserted bottles will be transferred by the indexing star wheel to the cap falling and capping stations

6. The capping head spins and moves up and down as a whole. When the bottles stop under it, the downward capping head clutches the caps and finishes capping. With plug detecting photo-electric eye, once there is no bottles on station or there is bottle but no cap, then the cap pressing mechanism will stop motioning as no inner plugs can be detected. By doing this, the finished product can be avoid being without inner plugs. The capping is mainly achieved by the up and down spinning motions,

The capped bottles are delivered to the end of machine and the next cycle is ready.

Maintenance

1 Potrebno je provjeriti i održavati stroj kako biste izdužili stroj i optimizirali rad stroja;

Ihe working machine should be maintained every three month; The bearing and gear transmission part must be lubricated with the grease; The lubrication must be done periodically; The slide way oil (N68) should be added into the part like reciprocating mechanism motion or lifting two times every day; The automobile oil(N68) should be added into the rotary or swinging parts; Every half month add the grease into the cam slot; Every month one time for oil nozzle by adding the grease;

2 Nikada ne upotrebljavajte metalne alate za udaranje ili struganje površine gdje je ljepljenje sakupljeno na dijelovima poput dijelova ili kalupa.

3.Ako stroj dulje vrijeme prestaje raditi, dodajte mast za podmazivanje u dijelove poput prijenosa ili dijela ležaja; Također tretirajte stroj vodootpornom zaštitom。

4.Never put any objects on the machine lest it damage the machine.

5. Očistite prašinu unutar komponenata, povremeno provjerite sve vijke i pričvrstite svaki otpušteni vijak.

6. Provjerite vijke u priključnicama za ožičenje u određeno vrijeme i budite sigurni da je vijak fiksiran;

7.provjerite da li postoji električna stanica u izvučenom putu ožičenja iz električnih kutija; Ako je dio previše labav, pričvrstite vijak kako ne bi došlo do abrazije ili oštećenja izolacijskog sloja, što može prouzrokovati električno propuštanje;

8. Provjerite lako istrošene maženje i na vrijeme promijenite oštećene;

Packaging & Transportation

Never lay the machine horizontally or upright down ; Dissemble the foot of machine and fix the whole machine with the bottom of crate .The machine should keep still in the crate without any loose from the crate or shake station during shipping;

The packing of machine should be neutral; When moving the machine please use the forklift truck or crane and move the machine from the bottom in stable movement; Notice the illustration in the picture as below; when hoisting and swinging the machine the crane should not be allowed to contact the machine. Fix the machine with 4pcs M16X200 of bolts then link the cranes and the bolts for hoisting and swinging of machines. Meanwhile to cushion the protection objects under the machine. Use the strut for stable hoisting if necessary (illustrated as below in fig)

Before unpacking the crate check if there be any damage on the crate; If any damage occurs on the crate do not open the crate and contact the shipping company immediately; Open the crate under the scrutiny from the shipping workers and record the process;

As far as the safety is concerned the distance from the ground for the forklift truck should be kept below 1m; If using the crane moving the machine the distance should be kept from 2meters to 2.5meters